Displaying Ripng Routing Table - Dell PowerConnect B-RX Configuration Manual

44
Displaying RIPng information
TABLE 178
This field...
Split horizon/poison reverse
Default routes
Periodic updates/trigger updates
Distribution lists
Redistribution

Displaying RIPng routing table

To display the RIPng routing table, enter the following command at any CLI level.
BigIron RX# show ipv6 rip route
IPv6 RIP Routing Table - 4 entries:
2000:4::/64, from ::, null
2002:c0a8:46a::/64, from ::, null
2999::1/128, from ::, null
5000:2::/64, from ::, null
Syntax: show ipv6 rip route [<ipv6-prefix>/<prefix-length> | <ipv6-address>]
The <ipv6-prefix>/<prefix-length> parameters restrict the display to the entries for the specified
IPv6 prefix. You must specify the <ipv6-prefix> parameter in hexadecimal using 16-bit values
between colons as documented in RFC 2373. You must specify the <prefix-length> parameter as a
decimal value. A slash mark (/) must follow the <ipv6-prefix> parameter and precede the
<prefix-length> parameter.
The <ipv6-address> parameter restricts the display to the entries for the specified IPv6 address.
You must specify this parameter in hexadecimal using 16-bit values between colons as
documented in RFC 2373.
This display shows the following information:
TABLE 179
This field...
RIPng Routing Table entries
<ipv6-prefix>/<prefix-length>
<ipv6-address>
1116
RIPng configuration fields (Continued)
Displays...
The status of the RIPng split horizon and poison reverse features. Possible
status is "on" or "off."
The status of RIPng default routes.
The number of periodic updates and triggered updates sent by the RIPng
router.
The inbound and outbound distribution lists applied to RIPng.
The types of IPv6 routes redistributed into RIPng. The types can include the
following:
•
STATIC – IPv6 static routes are redistributed into RIPng.
•
CONNECTED – Directly connected IPv6 networks are redistributed into
RIPng.
•
BGP – BGP4+ routes are redistributed into RIPng.
•
ISIS – IPv6 IS-IS routes are redistributed into RIPng.
•
OSPF – OSPFv3 routes are redistributed into RIPng.
(0)
CONNECTED, metric 1, tag 0, timers: none
CONNECTED, metric 1, tag 0, timers: none
(2)
CONNECTED, metric 1, tag 0, timers: none
(3)
CONNECTED, metric 1, tag 0, timers: none
RIPng routing table fields
Displays...
The total number of entries in the RIPng routing table.
The IPv6 prefix and prefix length.
The IPv6 address.
(1)
BigIron RX Series Configuration Guide
53-1001810-01