Dell PowerConnect B-RX Configuration Manual page 1011

Bigiron rx series configuration guide v02.7.02
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

To display detailed information about the multi-device port authentication configuration and
authenticated MAC addresses for a port where the feature is enabled, enter the following
command.:
BigIron RX# show auth-mac-address detail
Port 1/18
Dynamic-Vlan Assignment
RADIUS failure action
Override-restrict-vlan
Port VLAN
DOS attack protection
Accepted Mac Addresses
Rejected Mac Addresses
Aging of MAC-sessions
Port move-back vlan
MAC Filter applied
MAC TABLE
---------------------------------------------
MAC Address
---------------------------------------------
00A1.0010.2000 1/18
00A1.0010.2001 1/18
00A1.0010.2002 1/18
The following table describes the information displayed by the show authenticated-mac-address
command.
TABLE 145
This field...
Port
Dynamic-Vlan Assignment
RADIUS failure action
Override-restrict-vlan
Port VLAN
DOS attack protection
Accepted MAC Addresses
Rejected MAC Addresses
Aging of MAC-sessions
Max-Age of MAC-sessions
BigIron RX Series Configuration Guide
53-1001810-01
Displaying multi-device port authentication information
Port
VLAN Access
1
Allowed
1
Blocked
1
Init
Output from the show authenticated-mac-address command
Displays...
The port to which this information applies.
Whether RADIUS dynamic VLAN assignment has been enabled for the
port.
What happens to traffic from a MAC address for which RADIUS
authentication has failed: either block the traffic or assign the MAC
address to a restricted VLAN.
Whether a port can be dynamically assigned to a VLAN specified by a
RADIUS server, if the port had been previously placed in the restricted
VLAN because a previous attempt at authenticating a MAC address on
that port failed.
The VLAN to which the port is assigned, and whether the port had been
dynamically assigned to the VLAN by a RADIUS server.
Whether denial of service attack protection has been enabled for
multi-device port authentication, limiting the rate of authentication
attempts sent to the RADIUS server.
The number of MAC addresses that have been successfully
authenticated.
The number of MAC addresses for which authentication has failed.
Whether software aging of MAC addresses is enabled.
The configured software aging period.
: Enabled
: Block Traffic
: Yes
: 4094 (Configured)
: Disabled
: 0
: 0
: Enable-All
: Port-Configured
: No
1 : 0000.0010.2000
Age
0
120
0
31
939

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade dcx-4sBrocade dcx

Table of Contents