Dell PowerConnect B-RX Configuration Manual page 1359

TABLE 222
Message level
Notification
Notification
BigIron RX Series Configuration Guide
53-1001810-01
Brocade Syslog messages (Continued)
Message
OSPF virtual intf state changed,
rid <router-id>, area <area-id>,
nbr <ip-addr>, state <ospf-state>
OSPF nbr state changed, rid <router-id>, nbr
addr <ip-addr>, nbr rid <nbr-router-Id>, state
<ospf-state>
Syslog messages
Explanation
Indicates that the state of an OSPF virtual
routing interface has changed.
The <router-id> is the router ID of the router
the interface is on.
The <area-id> is the area the interface is in.
The <ip-addr> is the IP address of the OSPF
neighbor.
The <ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
•
down
•
loopback
•
waiting
•
point-to-point
•
designated router
•
backup designated router
•
other designated router
•
unknown
Indicates that the state of an OSPF neighbor
has changed.
The <router-id> is the router ID of the BigIron
RX.
The <ip-addr> is the IP address of the
neighbor.
The <nbr-router-id> is the router ID of the
neighbor.
The <ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
•
down
•
attempt
•
initializing
•
2-way
•
exchange start
•
exchange
•
loading
•
full
•
unknown
A
1287