TABLE 163
This field...
Global Sample Rate
Port Sampling Rates
Hardware Sample Rate
Clearing sFlow statistics
To clear the UDP packet and sFlow sample counters in the show sflow display, enter the following
command.
BigIron RX(config)# clear statistics.
Syntax: clear statistics
This command clears the values in the following fields of the show sflow display:
•
•
NOTE
This command also clears the statistics counters used by other features.
BigIron RX Series Configuration Guide
53-1001810-01
sFlow information (Continued)
UDP packets exported
sFlow samples collected
Displays...
The global sampling rate for the BigIron RX.
The sampling rates of a port on which sFlow is enabled.
The actual sampling rate. This is the same as the Global Sample Rate
39
sFlow
1035