Dell PowerConnect B-RX Configuration Manual page 1393

Bigiron rx series configuration guide v02.7.02
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

Commands
ip mtu <num>
ip proxy-arp
ip redirect
ip route <dest-ip-addr> <dest-mask> |
<dest-ip-addr>/<mask-bits> <next-hop-ip-addr> |
ethernet <slot/port> | ve <num> [<metric>] [tag <num>]
[distance <num>]
ip route <ip-addr> <ip-mask> |
<dest-ip-addr>/<mask-bits> null0 [<metric>] [tag <num>]
[distance <num>]
ip router-id <ip-addr>
Ip show-portname
ip show-subnet-length
ip source-route
ip radius source-interface
ethernet <slot/port> |
loopback <num> |
ve <num>
ip tacacs source-interface
ethernet <slot/port> |
loopback <num> |
ve <num>
ip telnet source-interface ethernet<slot/port> |
loopback <num> |
ve <num>
ip ttl <1-255>
rate-limit-arp <num>
router-interface ve <num>
show arp [ethernet <slot/port> | mac-address
<xxxx.xxxx.xxxx> [<mask>] | <ip-addr> [<ip-mask>]]
[<num>] [| begin<expression> | exclude<expression> |
include<expression>]
show ip
show ip cache [<ip-addr>] [| begin<expression> |
exclude<expression> | include<expression> ]
show ip interface [ethernet <slot/port>] | [loopback
<num>] | [ve <num>]
show ip route <num> | [<ip-addr> [<ip-mask>] [debug |
detail | longer] ] | connected | bgp | isis | ospf | rip |
static | summary ] [| begin<expression> |
exclude<expression> | include<expression>]
BigIron RX Series Configuration Guide
53-1001810-01
See ...
"Changing the maximum transmission unit on an
individual interface"
on page 174
"Enabling proxy ARP"
on page 182
"Disabling ICMP redirect messages"
"Configuring a static IP route"
"Configuring a "null" route"
on page 194
"Changing the router ID"
on page 174
"Displaying interface name in Syslog"
"Changing the network mask display to prefix format"
on page 156
"Disabling forwarding of IP source-routed packets"
page 187
"Specifying a single source interface for Telnet,
TACACS/TACACS+, or RADIUS packets"
"Specifying a single source interface for Telnet,
TACACS/TACACS+, or RADIUS packets"
"Specifying a single source interface for Telnet,
TACACS/TACACS+, or RADIUS packets"
"Changing the TTL threshold"
"Rate limiting ARP packets"
on page 180
"Assigning an IP address to a virtual interface"
page 155
"Displaying the ARP cache"
on page 217
"Displaying global IP configuration information"
page 213
"Displaying the forwarding cache"
"Displaying IP interface information"
"Displaying the IP route table"
E
IP
on page 190
on page 193
on page 216
on
on page 175
on page 175
on page 175
on page 186
on
on
on page 219
on page 215
on page 220
1321

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade dcx-4sBrocade dcx

Table of Contents