Dell PowerConnect B-RX Configuration Manual page 1386

E
BGP4
Commands
always-compare-med
as-path-filter <num> permit | deny <as-path>
as-path-ignore
clear ip bgp damping [<ip-addr> <ip-mask>]
clear ip bgp flap-statistics [regular-expression
<regular-expression> | <address> <mask> | neighbor
<ip-addr>]
clear ip bgp neighbor <ip-addr> [soft in prefix-filter]
clear ip bgp neighbor <ip-addr> | <peer-group-name> soft
in
clear ip bgp neighbor all | <ip-addr> | <peer-group-name>
| <as-num> [soft-outbound | soft [in | out]]
clear ip bgp neighbor all | <ip-addr> | <peer-group-name>
| <as-num> traffic
clear ip bgp neighbor all | <ip-addr> | <peer-group-name>
| <as-num>
last-packet-with-error | notification-errors
clear ip bgp routes [<ip-addr>/<prefix-length>]
clear ip bgp traffic
client-to-client-reflection
cluster-id <num> | <ip-addr>
community-filter <num> permit | deny <num>:<num> |
internet | local-as | no-advertise | no-export
compare-routerid
always-compare-med
confederation identifier <num>
confederation peers <num>
[<num> ...]
dampening [<half-life> <reuse> <suppress>
<max-suppress-time>]
default-information-originate
default-local-preference <num>
default-metric <num>
1314
See ...
"Configuring the BigIron RX to always compare
Multi-Exit Discriminators (MEDs)"
"Defining an AS-path filter" on page 751
"Disabling or re-enabling comparison of the AS-path
length" on page 758
"Removing route dampening from a route"
page 812
"Removing route flap dampening"
"Clearing route flap dampening statistics"
page 814
"Clearing route flap dampening statistics"
page 821
"Sending and receiving ORFs"
"Placing a policy change into effect"
"Dynamically refreshing routes"
"Clearing traffic counters" on page 820
"Clearing diagnostic buffers" on page 822
"Clearing and resetting BGP4 routes in the IP route
table" on page 820
"Clearing traffic counters" on page 820
"Disabling or re-enabling client-to-client route
reflection" on page 759
"Configuring a route reflector"
"Configuration procedures" on page 792
"Defining a community filter" on page 751
"Enabling or disabling comparison of the router IDs"
on page 759
"Configuring the BigIron RX to always compare
Multi-Exit Discriminators (MEDs)"
"Configuring a BGP confederation"
"Configuring a BGP confederation"
"Configuring route flap dampening"
"Originating the default route"
"Changing the default local preference"
"Changing the default metric used for redistribution"
on page 765
BigIron RX Series Configuration Guide
on page 757
on
on page 821
on
on
on page 808
on page 815
on page 818
on page 759
on page 757
on page 761
on page 761
on page 763
on page 764
on page 764
53-1001810-01