Dell PowerConnect B-RX Configuration Manual page 1096

38
RMON support
A sample CLI alarm entry and its syntax is shown below.
BigIron RX(config)# rmon alarm 1 ifInOctets.6 10 delta rising-threshold 100 1
falling threshold 50 1 owner nyc02
Syntax: rmon alarm <entry-number> <MIB-object.interface-num> <sampling-time>
The <sample-type> can be absolute or delta.
The <threshold-type> can be falling-threshold or rising-threshold.
Event (RMON group 9)
There are two elements to the Event Group—the event control table and the event log table.
The event control table defines the action to be taken when an alarm is reported. Defined events
can be found by entering the CLI command, show event. The Event Log Table collects and stores
reported events for retrieval by an RMON application.
A sample entry and syntax of the event control table is shown below.
BigIron RX(config)# rmon event 1 description 'testing a longer string'
log-and-trap public owner nyc02
Syntax: rmon event <event-entry> description <text-string> log | trap | log-and-trap | owner
1024
<sample-type> <threshold-type> <threshold-value> <event-number> <threshold-type>
<threshold-value> <event-number> owner <text-string>
<rmon-station>
BigIron RX Series Configuration Guide
53-1001810-01