Ipv6 Cli Command Support - Dell PowerConnect B-RX Configuration Manual

43
IPv6 host support
•
•
•
•
•

IPv6 CLI command support

Table 166
TABLE 166
IPv6 command
clear ipv6 cache
clear ipv6 neighbor
clear ipv6 route
clear ipv6 traffic
copy tftp
debug ipv6
ipv6 access-class
ipv6 access-list
ipv6 dns domain-name
ipv6 dns server-address
ipv6 enable
ipv6 neighbor
ipv6 route
log host ipv6
no ipv6 enable
ping ipv6
show ipv6
show ipv6 access-list
show ipv6 cache
show ipv6 interface
1072
IPv6 in boot PROM
IPv6 address configuration using DHCP
IPv6 TFTP using IPv6 link local address for a TFTP server
IPv6 link local address is not supported for IPv6 DNS server
TACAS, RADIUS, NTP over IPv6
lists the IPv6 CLI commands supported.
IPv6 CLI command support
Description
Deletes all entries in the dynamic host cache.
Deletes all dynamic entries in the IPv6 neighbor
table.
Deletes all dynamic entries in the IPv6 route table.
Resets all IPv6 packet counters.
Downloads a copy of a Brocade software image
from a TFTP server into the system flash using
IPv6.
Displays IPv6 debug information.
Configures access control for IPv6 management
traffic.
Configures an IPv6 access list for IPv6 access
control.
Configures an IPv6 domain name.
Configures an IPv6 DNS server address.
Enables IPv6 on an interface.
Maps a static IPv6 address to a MAC address in
the IPv6 neighbor table.
Configures an IPv6 static route.
Configures the IPv6 Syslog server. Refer to
"Configuring an IPv6 Syslog server"
Disables IPv6 on a global basis on a Layer 2
switch.
Performs an ICMP for IPv6 echo test.
Displays some global IPv6 parameters, such IPv6
DNS server address.
Displays configured IPv6 access lists.
Displays the IPv6 host cache.
Displays IPv6 information for an interface.
Switch code
X
X
X
X
X
X
X
X
X
on page 1074.
X
X
X
X
BigIron RX Series Configuration Guide
Router code
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
53-1001810-01