Dell PowerConnect B-RX Configuration Manual page 1218

45
Displaying BGP4+ information
To display detailed information about the routes that have been filtered out by BGP4+ route
policies, enter the following command at any level of the CLI.
BigIron RX# show ipv6 bgp filtered-routes detail
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
1
2
3
4
5
6
Syntax: show ipv6 bgp filtered-routes detail [<ipv6-prefix>/<prefix-length> [longer-prefixes] |
The <ipv6-prefix>/<prefix-length> parameter displays the specified IPv6 prefix of the destination
network only. You must specify the <ipv6-prefix> parameter in hexadecimal using 16-bit values
between colons as documented in RFC 2373. You must specify the <prefix-length> parameter as a
decimal value. A slash mark (/) must follow the <ipv6-prefix> parameter and precede the
<prefix-length> parameter.
The longer-prefixes keyword allows you to display routes that match a specified or longer IPv6
prefix. For example, if you specify 2002::/16 longer-prefixes, then all routes with the prefix
2002::/16 or that have a longer prefix (such as 2002:e016::/32) are displayed.
The as-path-access-list <name> parameter specifies an AS-path ACL. Only the routes permitted by
the AS-path ACL are displayed.
The prefix-list <name> parameter specifies an IPv6 prefix list. Only the routes permitted by the
prefix list are displayed.
This display shows the following information:
TABLE 186
This field...
Status codes
Prefix
Status
1146
Prefix: 800:2:1::/64, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 100
Prefix: 900:1:18::/64, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 100
Prefix: 1000:1:1::/64, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 100
Prefix: 2000:1:1::/64, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 100
Prefix: 2000:1:11::1/128, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: igp, Weight: 0
AS_PATH: 100
Prefix: 2000:1:17::/64, Status: EF, Age: 0h0m10s
NEXT_HOP: 2000:1:1::1, Learned from Peer: 2000:1:1::1 (100)
LOCAL_PREF: 100, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 100
[as-path-access-list <name>] | [prefix-list <name>]
Detailed filtered-rut BGP4+ route information
Displays...
A list of the characters the display uses to indicate the route's status.
The Status field display an "F" for each filtered route.
For information about this field, refer to
For information about this field, refer to
Table 185 on page 1144.
Table 185 on page 1144.
BigIron RX Series Configuration Guide
53-1001810-01