Restricting Snmp Access To An Ipv6 Node; Specifying An Ipv6 Snmp Trap Receiver; Restricting Web Management Access To An Ipv6 Host By Specifying An - Dell PowerConnect B-RX Configuration Manual

TABLE 166
IPv6 command
show ipv6 neighbor
show ipv6 route
show ipv6 router
show ipv6 tcp
show ipv6 traffic
snmp-client ipv6
snmp-server host ipv6
telnet
traceroute ipv6
web access-group ipv6
web client ipv6

Restricting SNMP access to an IPv6 node

You can restrict SNMP access (which includes IronView Network Manager) to the device to the IPv6
host whose IP address you specify. To do so, enter a command such as the following:
BigIron RX(config)# snmp-client ipv6 2001:efff:89::23
Syntax: snmp-client ipv6 <ipv6-address>
The <ipv6-address> you specify must be in hexadecimal format using 16-bit values between colons
as documented in RFC 2373.

Specifying an IPv6 SNMP trap receiver

You can specify an IPv6 host as a trap receiver to ensure that all SNMP traps sent by the device will
go to the same SNMP trap receiver or set of receivers, typically one or more host devices on the
network. To do so, enter a command such as the following.
BigIron RX(config)# snmp-server host ipv6 2001:efff:89::13
Syntax: snmp-server host ipv6 <ipv6-address>
The <ipv6-address> you specify must be in hexadecimal format using 16-bit values between colons
as documented in RFC 2373.
BigIron RX Series Configuration Guide
53-1001810-01
IPv6 CLI command support (Continued)
Description
Displays the IPv6 neighbor table.
Displays IPv6 routes.
Displays IPv6 local routers.
Displays information about IPv6 TCP sessions.
Displays IPv6 packet counters.
Restricts SNMP access to a certain IPv6 node.
Refer to "Restricting SNMP access to an IPv6
node" on page 1073.
Specifies the recipient of SNMP notifications.
Refer to "Specifying an IPv6 SNMP trap receiver"
on page 1073.
Enables a Telnet connection from the Brocade
device to a remote IPv6 host using the console.
Traces a path from the Brocade device to an IPv6
host.
Restricts Web management access to certain IPv6
hosts as determined by IPv6 ACLs. Refer to
"Restricting web management access to an IPv6
host by specifying an IPv6 ACL"
Restricts Web management access to certain IPv6
hosts. Refer to
access to an IPv6 host"
on page 1074.
"Restricting web management
on page 1074.
43
IPv6 host support
Switch code Router code
X X
X
X
X X
X X
X X
X X
X X
X X
X X
X X
1073