Dell PowerConnect B-RX Configuration Manual page 994

30
Displaying Bidirectional Forwarding Detection information
TABLE 142
This field...
Holddown
Interval
RH
Registered Protocols
Local
Remote
Stats: Rx
Stats: Tx
Stats: SessionUpCount
Stats: SysUpTime
922
Display of BFD neighbor detail information (Continued)
Disc
Diag
Demand
Poll
MinTxInterval
MinRxInterval
Multiplier
Disc
Diag
Demand
Poll
MinTxInterval
MinRxInterval
Multiplier
Displays...
The interval after which the session will transition to the down state if no
message is received.
The interval at which the local router sends BFD messages to the remote
peer.
Heard from remote.
Specifies which protocols are registered to use BFD on this port.
Value of the "local discriminator" field in the BFD Control Message as
used by the local router in the last message sent.
Value of the "diagnostic" field in the BFD Control Message as used by
the local router in the last message sent.
Value of the "demand" bit in the BFD Control Message as used by the
local router in the last message sent.
Value of the "poll" bit in the BFD Control Message as used by the local
router in the last message sent.
The interval in microseconds between which the router negotiates to
send a BFD message from this local neighbor port to its peer.
The interval in microseconds that the neighbor router waits to receive a
BFD message from its peer on this local port.
The number of times that the neighbor router will wait for the
MinRxInterval time on this port before it determines that its peer router
is non-operational.
Value of the "local discriminator" field in the BFD Control Message as
received in the last message sent by the remote peer.
Value of the "diagnostic" field in the BFD Control Message as received in
the last message sent by the remote peer.
Value of the "demand" bit in the BFD Control Message as received in the
last message sent by the remote peer.
Value of the "poll" bit in the BFD Control Message as received in the last
message sent by the remote peer.
The interval in microseconds between which the router negotiates to
send a BFD message from the remote neighbor port to its peer.
The interval in microseconds that the neighbor router waits to receive a
BFD message from its peer on this remote port.
The number of times that the remote neighbor router will wait for the
MinRxInterval time on this port before it determines that its peer router
is non-operational.
Total number of BFD control messages received from the remote peer.
Total number of BFD control messages sent to the remote peer.
The number of times the session has transitioned to the UP state.
The amount of time that the system has been up.
BigIron RX Series Configuration Guide
53-1001810-01