Displaying Fip Snooping Information - Dell S4048T Configuration Manual

6 Configure the port for bridge-to-FCF links.
INTERFACE mode or CONFIGURATION mode
fip-snooping port-mode fcf
NOTE: To disable the FCoE transit feature or FIP snooping on VLANs, use the no version of a command;
for example, no feature fip-snooping or no fip-snooping enable.

Displaying FIP Snooping Information

Use the following show commands to display information on FIP snooping.
Table 29. Displaying FIP Snooping Information
Command
show fip-snooping sessions [interface
vlan vlan-id]
show fip-snooping config
show fip-snooping enode [enode-mac-
address]
show fip-snooping fcf [fcf-mac-address]
clear fip-snooping database interface
vlan vlan-id {fcoe-mac-address | enode-
mac-address | fcf-mac-address}
show fip-snooping statistics [interface
vlan vlan-id| interface port-type port/
slot | interface port-channel port-
channel-number]
clear fip-snooping statistics [interface
vlan vlan-id | interface port-type port/
slot | interface port-channel port-
channel-number]
show fip-snooping system
Output
Displays information on FIP-snooped sessions on all
VLANs or a specified VLAN, including the ENode
interface and MAC address, the FCF interface and
MAC address, VLAN ID, FCoE MAC address and FCoE
session ID number (FC-ID), worldwide node name
(WWNN) and the worldwide port name (WWPN).
Displays the FIP snooping status and configured FC-
MAP values.
Displays information on the ENodes in FIP-snooped
sessions, including the ENode interface and MAC
address, FCF MAC address, VLAN ID and FC-ID.
Displays information on the FCFs in FIP-snooped
sessions, including the FCF interface and MAC
address, FCF interface, VLAN ID, FC-MAP value, FKA
advertisement period, and number of ENodes
connected.
Clears FIP snooping information on a VLAN for a
specified FCoE MAC address, ENode MAC address, or
FCF MAC address, and removes the corresponding
ACLs generated by FIP snooping.
Displays statistics on the FIP packets snooped on all
interfaces, including VLANs, physical ports, and port
channels.
Clears the statistics on the FIP packets snooped on
all VLANs, a specified VLAN, or a specified port
interface.
Displays information on the status of FIP snooping
on the switch (enabled or disabled), including the
number of FCoE VLANs, FCFs, ENodes, and currently
active sessions.
FIP Snooping 387