Dell PowerConnect B-RX Configuration Manual page 1322

49
IPv6 PIM sparse
Displaying basic PIM sparse configuration information
To display IPv6 PIM Sparse configuration information, enter the following command at any CLI level.
BigIron RX#show ipv6 pim sparse
Global PIM Sparse Mode Settings
Hello interval
Bootstrap Msg interval
Register Suppress interval: 60
Join/Prune interval
Inactivity interval
SSM Enabled
Syntax: show ipv6 pim sparse
This display shows the following information.
TABLE 218
This field...
Global PIM sparse mode settings
Hello interval
Neighbor timeout
Bootstrap Msg interval
Candidate-RP Advertisement
interval
Join/Prune interval
SPT Threshold
Inactivity Interval
SSM Enabled
IPv6 PIM sparse interface information
NOTE: You also can display IPv6 multicast interface information using the show ipv6 pim interface command.
1250
: 30 Neighbor timeout
: 60 Candidate-RP Advertisement interval: 60
Register Stop Delay
: 60 SPT Threshold
: 180 Hardware Drop Enabled
: Yes
Displays...
How frequently the BigIron RX sends IPv6 PIM Sparse hello messages to its
IPv6 PIM Sparse neighbors. This field show the number of seconds between
hello messages. IPv6 PIM Sparse routers use hello messages to discover one
another.
How many seconds the BigIron RX will wait for a hello message from a neighbor
before determining that the neighbor is no longer present and removing
cached IPv6 PIM Sparse forwarding entries for the neighbor.
How frequently the BSR configured on the BigIron RX sends the RP set to the
RPs within the IPv6 PIM Sparse domain. The RP set is a list of candidate RPs
and their group prefixes. A candidate RP's group prefix indicates the range of
IPv6 PIM Sparse group numbers for which it can be an RP.
NOTE: This field contains a value only if an interface on the BigIron RX is
elected to be the BSR. Otherwise, the field is blank.
How frequently the candidate PR configured on the BigIron RX sends candidate
RP advertisement messages to the BSR.
NOTE: This field contains a value only if an interface on the BigIron RX is
configured as a candidate RP. Otherwise, the field is blank.
How frequently the BigIron RX sends IPv6 PIM Sparse Join/Prune messages for
the multicast groups it is forwarding. This field show the number of seconds
between Join/Prune messages.
The BigIron RX sends Join/Prune messages on behalf of multicast receivers
who want to join or leave an IPv6 PIM Sparse group. When forwarding packets
from IPv6 PIM Sparse sources, the BigIron RX sends the packets only on the
interfaces on which it has received join requests in Join/Prune messages for
the source's group.
The number of packets the BigIron RX sends using the path through the RP
before switching to using the SPT path.
If yes, source-specific multicast is configured globally on this router.
: 105
: 60
: 1
: Yes
BigIron RX Series Configuration Guide
53-1001810-01