1. When the Machine Does Not Operate As Wanted
When an Indicator to the Right of a Function Key
Is Lit
1
When an indicator to the right of a function key lights up, press the corresponding function key. Then, follow
the instructions displayed on the control panel.
If an error occurs in the function you are using, check the message that appears on the control panel, and
then refer to "Messages Displayed" for the relevant function.
The following table explains problems that cause the indicator to light.
Problem
Documents and reports do
not print out.
Documents and reports do
not print out.
An error has occurred.
18
BQN037S
Cause
The paper output tray is full.
There is no paper left.
The function whose indicator
is lit is defective.
Solution
Remove the prints from the tray.
Load paper. See "Loading Paper",
About This Machine
Check the displayed message and take
an appropriate action. See "Messages
Displayed" of each chapter.
You can use other functions normally.
.