Ricoh Aficio MP 7001 Troubleshooting Manual page 24

1. When the Machine Does Not Operate As Wanted
Problem
"You do not have the
privileges to use this function."
1
continues to be displayed
even though you have
entered a valid user name.
An error message remains,
even if misfed paper is
removed.
Original images are printed
on the reverse side of the
paper.
Misfeeds occur frequently.
Misfeeds occur frequently.
22
Cause
The logged in user name does
not have permission for the
selected function.
• When a misfeed
message appears, it
remains until you open
and close the cover as
required.
• Paper is still jammed in
the tray.
You may have loaded the
paper incorrectly.
The tray's side or end fences
may not be set properly.
Paper of undetectable size
has been loaded.
Solution
Contact the administrator about the
permission for the required function.
Remove misfed paper, and then open
and close the cover. See p.121
"Removing Jammed Paper".
Load paper correctly. Place paper in the
paper tray with the print side down. LCT
and Bypass tray with the print side up.
• Remove the misfed paper. See
p.121 "Removing Jammed
Paper".
• Check the side or end fences are
set properly. Also, check the side
fences are locked. See "Changing
the Paper Size", About This
Machine .
• Remove the misfed paper. See
p.121 "Removing Jammed
Paper".
• If you load a paper size that is not
selected automatically, you need
to specify the paper size with the
control panel. See "Changing to a
Size That Is Not Automatically
Detected", About This Machine
.