When An Indicator To The Left Of A Function Key Is Lit - Ricoh pro c900s Operating Instructions Manual

When an Indicator to the Left of a Function Key
Is Lit
When an indicator to the left of a function key is lit, press the corresponding function key. Then, follow the
instructions displayed on the control panel.
If a function error occurs, check the message that appears on the control panel, and then refer to "Messages
Displayed" for the relevant function.
To resolve problems, refer to the following:
Problem
Documents and reports do
not print out.
Documents and reports do
not print out.
An error has occurred.
BQR002S
Cause
The paper output tray is full.
There is no paper left.
The function is not working
properly.

When an Indicator to the Left of a Function Key Is Lit

Solution
Remove prints from the tray.
Load paper. See p.53 "Loading
Paper".
Record the code number shown on the
display and contact your service
representative. See "Messages
Displayed" of each chapter.
You can use the other functions as
normal.
1
13