When An Indicator To The Right Of A Function Key Is Lit - Ricoh 5100WD Operating And Troubleshooting Manual

1. When the Machine Does Not Operate As Wanted
When an Indicator to the Right of a Function Key
Is Lit
1
When an indicator to the right of a function key lights up, press the corresponding function key. Then, follow
the instructions displayed on the control panel.
If an error occurs in the function you are using, check the message that appears on the control panel, and
then refer to "Messages Displayed" for the relevant function.
Following describe the main reasons the indicator lights up.
Problem
Documents and reports do
not print out.
An error has occurred.
12
BLI018S
Cause
There is no paper left.
The function whose indicator
is lit is defective.
Solution
Load paper. See p.77 "Loading
Paper".
Record the code number shown on the
display and contact your service
representative. See "Messages
Displayed" of each chapter.
You can use other functions normally.