1. When the Machine Does Not Operate As Wanted
When a Job Is Not Performed
If you are not able to carry out your job, it may be that the machine is being used by another function.
1
Wait until the current job is completed before trying again. In certain cases, you can carry out another job
using a different function while the current job is being performed. Performing multiple functions
simultaneously like this is called "Multi-accessing".
Combination Chart
Function Compatibility
The chart shows Function Compatibility when print priority is set to [Interleave]. For details about Print
Priority, see "System Settings", Network and System Settings Guide
: Simultaneous operations are possible.
: Operation is enabled when the relevant function key is pressed and remote switching (of the
scanner/external extension) is done.
: Operation is enabled when the [Interrupt] key is pressed to interrupt the preceding operation.
: Operation is performed automatically once the preceding operation ends.
: The operation must be started once the preceding operation ends. (Simultaneous operations are
not possible.)
24
.