6. Clearing Misfeeds
Removing Staple Waste
This section describes how to remove staple waste.
Finisher SR4050
The following procedure describes how to remove staple waste from the Finisher SR4050.
• While "Waste Staple Receptacle is full." is displayed, you cannot use the Staple function.
• "Waste Staple Receptacle is full." is displayed until the staple waste box is reinstalled.
• If the message is still displayed, reinstall the staple waste box.
1.
Open the finisher front cover.
6
2.
Pull out the staple waste box carefully, and then remove staple waste.
144
BQN023S
BQN026S