Ricoh Aficio MP 7001 Troubleshooting Manual page 101

Problem
It takes a long time to
complete a print job.
Images are printed in the
wrong orientation.
When using Windows
2000/ XP/ Vista and
Windows Server 2003/
2003 R2/ 2008, optional
components connected to the
machine are not recognized.
When using Windows
2000/ XP/ Vista and
Windows Server 2003/
2003 R2/ 2008, combined
printing, booklet printing, or
Auto Reduce / Enlarge
printing does not come out as
expected.
A print instruction was issued
from the computer, but
printing did not start.
The print job is not canceled
even when the machine is
switched to offline status.
Cause
Documents with a lot of
characters may take some
time to print.
The feed orientation you
selected and the feed
orientation selected in the
printer driver's option setup
might not be the same.
Bidirectional communication
is not working.
The correct application or
printer driver settings are not
made.
User Authentication may
have been set.
Even when the machine is
offline, printing is performed
when [Job Acceptance
Priority] has been set in
[Parallel Interface] in the
[Interface Settings] in the
System Settings menu.
Other Printing Problems
Solution
On the RPCS printer driver's [Print
Quality] tab, display the [Change User
Settings...] dialog box, ensure that
[Change methods to extract TrueType
fonts] is checked, and then print.
Set the same settings for both the
machine's feed orientation and the feed
orientation specified in [Paper source
tray settings:] on the RPCS printer driver's
[Change Accessories] tab.
Set up optional devices on the Properties
of the printer. See the printer driver Help.
Make sure the application's paper size
and orientation settings match those of
the printer driver. If a different paper size
and orientation are set, select the same
size and orientation.
Contact the administrators.
Change the setting of Signal Control to
Printer priority. See "Interface Settings",
Network and System Settings Guide
.
4
99