Ricoh Aficio MP 7001 Troubleshooting Manual page 114

5. Troubleshooting When Using the Scanner Function
Message
"Exceeded max. number of
standby files. Try again after
the current file is sent."
"Exceeded max. number of
stored files. Cannot send the
scanned data as capturing
files is unavailable."
"Exceeded max. page
capacity per file. Press [Send]
to send the scanned data, or
press [Cancel] to delete."
5
"Exceeded max. page
capacity per file. Press
[Write] to write the scanned
data to the memory storage
device, or press [Cancel] to
delete."
"Exceeded maximum number
of file to store. Delete all
unnecessary files."
"Exceeded time limit for LDAP
server search. Check the
server status."
"Invalid certificates or no S/
MIME certificates were
found."
112
Cause
The maximum number of
standby files was exceeded.
Too many files are waiting to
be delivered.
The number of scanned
pages exceeded maximum
page capacity.
The scan could not be
completed because the
maximum number of pages
that can be scanned by this
machine was exceeded
during writing to the Memory
device.
Too many files are waiting to
be delivered.
A network error has occurred
and connection has failed.
The destination's S/MIME
certificates are invalid or
cannot be found.
Solution
There are 100 files waiting in the
sending queue for e-mail, Scan to
Folder, or delivery functions. Wait until
files have been sent.
Try again after they have been
delivered.
Select whether to send the data so far.
Reduce the number of documents to be
written to the memory device and try
again.
Please try again after they have been
delivered.
• Try the operation once more. If the
message is still shown, the network
may be crowded.
• In [System Settings], under
[Administrator Tools], check the
settings of LDAP server. For details,
see "Programming the LDAP
server", Network and System
Settings Guide .
Contact the administrator.