Ricoh Aficio MP 7001 Troubleshooting Manual page 64

3. Troubleshooting When Using the Facsimile Function
Reception
Problem
The machine failed to print
received fax documents.
3
The machine failed to print
received fax documents.
The machine failed to print
received fax documents.
While pressing [Manual E-
mail RX], "Cannot receive E-
mails currently." appears and
e-mail cannot be received.
Printing
Problem
Print is slanted.
Print is slanted.
Misfeeds occur frequently.
Misfeeds occur frequently.
62
Cause
If this happened when the
Receiving File indicator was
lit, low paper may have
caused printing to stop.
In [Facsimile Features], under
[Reception Settings], [Store]
has been selected for
[Reception File Setting].
An alert indicator is lit.
The machine is receiving an
on-demand e-mail message
(e-mail inquiry from the
administrator).
Cause
The tray's side fences might
not be locked.
The paper is fed at a slant.
The number of feeding in the
paper tray exceeds the
capacity of the machine.
The paper tray's side fences
are set too tightly.
Solution
• Load paper into the tray.
• Add toner.
For details about Substitute Reception,
see "Substitute Reception", Facsimile
Reference .
Print the fax documents using a Web
browser or the Print Stored RX File
function. See "Printing Received and
Stored Documents" and "Viewing,
Printing, and Deleting Received Fax
Documents Using a Web Image
Monitor", Facsimile Reference
Load paper into the tray. See "Loading
Paper", About This Machine
After the e-mail is received, press
[Manual E-mail RX], and then try again.
Solution
Make sure the side fences are locked.
See "Changing the Paper Size", About
This Machine .
Load the paper correctly. See "Loading
Paper", About This Machine
Load paper only as high as the upper
limit markings on the side fences of the
paper tray, LCT, or bypass tray.
Push the side fences lightly, and then
reset it.
.
.
.