6. Clearing Misfeeds
3.
Reinstall the punch waste box.
4.
Close the finisher front cover.
"Hole Punch Receptacle is full." disappears.
Finisher SR4050
6
The following procedure describes how to remove punch waste from the Finisher SR4050.
• While "Hole Punch Receptacle is full." is displayed, you cannot use the Punch function.
• "Hole Punch Receptacle is full." is displayed until the punch waste box is reinstalled.
• If the message is still displayed, reinstall the punch waste box.
1.
Open the finisher front cover.
142
BQM004S
BQN023S