Messages Displayed On The Client Computer - Ricoh Aficio MP 7001 Troubleshooting Manual

5. Troubleshooting When Using the Scanner Function
Message
"The selected file(s)
contained file(s) without
access privileges. Only file(s)
with access privileges will be
deleted."
"Transmission has failed.
Insufficient memory in the
destination hard disk. To
check the current status, press
[Scanned Files Status]."
"Transmission has failed. To
5
check the current status, press
[Scanned Files Status]."
"Updating the destination list
has failed. Try again?"
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
"You do not have the
privileges to use this function."

Messages Displayed on the Client Computer

This section describes likely causes of and possible solutions for the main error messages displayed on the
client computer when using the TWAIN driver.
• If a message not described here appears, act according to the message. For information about how
to turn off the main power switch, see "Turning On/Off the Power", About This Machine
116
Cause
You have tried to delete files
without the authority to do so.
Transmission has failed.
There was not enough free
space on the hard disk of the
SMTP server, FTP server, or
client computer at the
destination.
While a file was being sent, a
network error occurred and
the file could not be sent
correctly.
A network error has occurred. Check whether the server is connected.
The destination list is being
updated.
The logged in user name does
not have permission for the
selected function.
Solution
The files can be deleted by the file
administrator. To delete a file which you
are not authorized to delete, contact the
administrator.
Allocate sufficient space.
If the same message appears again after
scanning again, the cause could be a
mixed network, or else network settings
were changed during WSD scanner
transmission. Check with your system
administrator.
If a destination or sender's name was
already selected, re-select it after this
message disappears.
Contact the administrator about the
permission for the required function.
.