Ricoh Aficio MP 7001 Troubleshooting Manual page 59

Message
"Exceeded time limit for
LDAP server search. Check
the server status."
"Functional problems with
facsimile. Data will be
initialized."
"LDAP server authentication
has failed. Check the
settings."
"Original is being scanned
by another function. Switch
to the following function,
then press the Stop key to
cancel scanning or press the
Start key to continue."
"Put original back, check it
and press the Start key."
"Remove paper from Copy
Tray."
Cause
A network error has occurred
and connection has failed.
There is a problem with the
fax.
A network error has occurred
and connection has failed.
A function of the machine
other than the Facsimile
function is being used such as
the Document Server function.
Original jammed during
Memory Transmission.
Copy Tray is full.
Messages Displayed When Using the Facsimile Function
Solution
• Try the operation once more. If the
message is still shown, the network
may be crowded.
• In [System Settings], under
[Administrator Tools], check the
settings of LDAP server. For details,
see "Programming the LDAP
server", Network and System
Settings Guide
Record the code number shown on the
display and contact your service
representative. Other functions can be
used.
Make settings correctly for the user
name and the password for LDAP server
authentication.
Before sending a file by fax, cancel the
job in progress. For example, press
[Exit], and then press the [Document
Server] key. Next, press the [Clear/
Stop] key. When the message "The
Clear / Stop key was pressed. Are you
sure you want to stop scanning?"
appears, press [Stop].
Press [Exit], and then send the
documents again.
Remove the paper. If the other tray is
also full, the tray name shown on the
display changes. Remove paper from
the tray indicated on the display.
3
.
57