Trane IntelliPak Signature Series Programming Manual page 73

PKG-SVP01B-EN
Programming
Active Diagnostic ---- Auto Reset
______________________________
Possible Values: Failure for the Following
RTM Zone
Supply Air Temp
RTM Aux. Temp
OA Temp
Mode Input
Occ Zone Cool Setpoint
Occ Zone Heat Setpoint
Supply air Pres
OA Humidity
SCM Communication
MCM Communication
ECEM Communication
TCI Communication
Tracer
Unit HI Communication
Sup Air Temp Cool Setpt
NSB Panel Zone Temp
VCM Aux Temp
VCM Communication
Ent Cond Water Temp
WSM Mixed Air Temp
OR
Pressing the NEXT key to view the diagnostics will prompt the following screen if an
"information only" failure has occurred.
Active Diagnostic ---- Info
______________________________
Possible Values: Heat Fail
Dirty Filter
Ventilation Override Mode A, B, C, D, or E
RTM Data Storage Error
Note: Activation of any VOM mode can be viewed within the "Active Diagnostic" screen.
DIAGNOSTICS
OR
Heat Aux Temp
Unocc Zone Cool Setpt
Unocc Zone Heat Setpt
Supply Air Press Setpt
Space Static Pres Setpt
Space Pressure
Return Air Temp
RA Humidity
Auto Reset SA Static Pres Limit
Evap Temp - Ckt 1, 2, 3, 4
Heat Module Commun.
Cond Temp - Ckt 1, 2, 3, 4
GBAS Module Communication
® Communication NSB Panel Communication
VOM Communication
Sup Air Temp Heat Setpt
CO2 Sensor
Velocity Press
WSM Communication
Ent Water Temp
Water Flow
More
More
73