Trane IntelliPak Signature Series Programming Manual page 66
Commercial self-contained signature series, 20-80 ton modular series, 20-35 ton, “ao” and later design sequence
Hide thumbs
Also See for IntelliPak Signature Series:
- Installation, owner, and diagnostic manual (109 pages) ,
- Programming manual (52 pages)
Table of Contents
Advertisement
66
Programming
Configuration - Model Num Digit 33
TCI4 Communications Module
Possible Values:
1. Pressing the NEXT key will display the following screen.
Configuration - Model Num Digit 33
Remote Human Interface
Possible Values:
1. Pressing the NEXT key will display the following screen.
(On all units unless the RTM has changed)
Unit Model Number
Possible Values:
Model Number
1. Pressing the NEXT key will display the following screen.
Software Revision Number Report:
RTM
1. Pressing the NEXT key will display the following screen.
Software Revision Number Report:
Single Compressor Module (SCM)
1. Pressing the NEXT key will display the following screen.
Software Revision Number Report:
Multiple Compressor Module (MCM)
1. Pressing the NEXT key will display the following screen.
(On units with a GBAS)
Software Revision Number Report:
GBAS 0-5 VDC Module
1. Pressing the NEXT key will display the following screen.
(On units with a VOM)
Software Revision Number Report:
Ventilation Override (VOM)
1. Pressing the NEXT key will display the following screen.
CONFIGURATION
INSTALLED
Installed
Not Installed
INSTALLED
Installed
Not Installed
9.13
1.00
4.09
1.00
1.00
PKG-SVP01B-EN
Hide quick links:
Advertisement
Table of Contents
