Trane IntelliPak Signature Series Programming Manual page 20

20
Programming
Active Outside Air Temperature
Low Ambient Comp Lockout Temp:
Possible values: Lockout Temperature = -20-80 F
1. Pressing the NEXT key will display the following screen.
( On units all water-cooled units only)
WSM Ent Cond Water Temp Input
Low Water Temp Compressor Lockout
Possible values: Lockout Temperature = 0-99 F
1. Pressing the NEXT key will display the following screen.
Compressor Module Ckt 1
Evap Temp 75.0 F
1. Pressing the NEXT key will display the following screen.
Compressor Module Ckt 2
Evap Temp 72.0 F
1. Pressing the NEXT key will display the following screen.
( On all SCWF/SIWF 35-80 ton units only)
Compressor Module Ckt 3
Evap Temp 72.0 F
1.Pressing the NEXT key will display the following screen.
( On all SCWF/SIWF 60-80 ton units only)
Compressor Module Ckt 4
Evap Temp 72.0 F
1. Pressing the NEXT key will display the following screen.
End of Submenu (NEXT) to Enter SETUP
1. Pressing the NEXT key will display the following screen.
( On units with a waterside or airside economizer only)
Economizer Status Submenu
Press ENTER to View Data in This Submenu
1. Pressing the NEXT key will display the following screen.
STATUS
86.0 F
32 F
65.2 F
34 F
Sat Cond Temp 81.0 F
Sat Cond Temp 97.0 F
Sat Cond Temp 97.0 F
Sat Cond Temp 97.0 F
PKG-SVP01B-EN