Trane IntelliPak Signature Series Programming Manual page 22
Commercial self-contained signature series, 20-80 ton modular series, 20-35 ton, “ao” and later design sequence
Hide thumbs
Also See for IntelliPak Signature Series:
- Installation, owner, and diagnostic manual (109 pages) ,
- Programming manual (52 pages)
Table of Contents
Advertisement
22
Programming
( On units with an airside economizer only)
Active Outside Air Humidity
ECEM Return Air Humidity
Possible values:
1. Pressing the NEXT key will display the following screen.
End of Submenu (NEXT) to Enter SETUP
1. Pressing the NEXT key will display the following screen.
Controlling Setpoint Status Submenu
Press ENTER to View Data in This Submenu
1. Pressing the NEXT key will display the following screen.
(On all VAV units only)
Active Supply Air Cooling STP From
HI (KEYPAD)
Possible Values:
1. Pressing the NEXT key will display the following screen.
(On all VAV units with hydronic heat only)
Active Supply Air Heating STP From
HI (KEYPAD)
Possible Values:
1. Pressing the NEXT key will display the following screen.
(On all VAV units with hydronic, electric, or external heat only)
Active Daytime Warmup Setpoints
Initiate: 67 F
Possible Values:
1. Pressing the NEXT key will display the following screen.
STATUS
30 %
62 %
0-100%
SETPOINT MENU
Is
HI (Keypad) Setpoint Menu
Zone Sensor Setpoint Input
NSB Zone Sensor Setpoint Input
GBAS 0-5 VDC Module
®
ICS (Tracer Summit
)
SETPOINT MENU
Is
HI (Keypad) Setpoint Menu
Zone Sensor Setpoint Input
NSB Zone Sensor Setpoint Input
GBAS 0-5 VDC Module
ICS (Tracer Summit
®
)
is
Terminate: 71 F
HI (Keypad) Setpoint Menu
55 F
100 F
PKG-SVP01B-EN
Hide quick links:
Advertisement
Table of Contents
