Trane IntelliPak Signature Series Programming Manual page 64
Commercial self-contained signature series, 20-80 ton modular series, 20-35 ton, “ao” and later design sequence
Hide thumbs
Also See for IntelliPak Signature Series:
- Installation, owner, and diagnostic manual (109 pages) ,
- Programming manual (52 pages)
Table of Contents
Advertisement
64
Programming
(On all water-cooled units and water flow switch or units with a waterside
economizer and water flow switch)
Configuration - Model Num Digit 29
Water Flow Switch
Possible Values:
1. Pressing the NEXT key will display the following screen.
Configuration - Model Num Digit 20
Heating Type
Possible Values:
1. Pressing the NEXT key will display the following screen.
Configuration - Model Num Digit 6, 7
Unit Capacity
Possible Values:
Note: The possible value for unit capacity is dependent upon the unit size (tons).
1. Pressing the NEXT key will display the following screen.
Configuration - Model Num Digit 23
Power Exhaust
Possible Values:
Note: This option is currently not available on commercial self-contained units, but this
screen still displays.
1. Pressing the NEXT key will display the following screen.
Configuration - Model Num Digit 28
Air Economizer
Possible Values:
1. Pressing the NEXT key will display the following screen.
CONFIGURATION
INSTALLED
Installed
Not Installed
HYDRONIC
Hydronic
Electric
None
External
72
20-80
NONE
None
100% with Statitrac
50%/100% without Statitrac
INSTALLED
Installed
Not Installed
PKG-SVP01B-EN
Hide quick links:
Advertisement
Table of Contents
