Trane IntelliPak Signature Series Programming Manual page 65
Commercial self-contained signature series, 20-80 ton modular series, 20-35 ton, “ao” and later design sequence
Hide thumbs
Also See for IntelliPak Signature Series:
- Installation, owner, and diagnostic manual (109 pages) ,
- Programming manual (52 pages)
Table of Contents
Advertisement
PKG-SVP01B-EN
Programming
Configuration - Model Num Digit 9
Air Temp/Vol Ctrl SA CTRL WITH IGV/VFD
Possible Values:
SA Control with IGV/VFD
Zone Control
No IGV/VFD or SA Control
No IGV/VFD
1. Pressing the NEXT key will display the following screen.
(On units with SA Control and IGV/VFD installed)
Configuration - Model Num Digit 9
Supply Fan VFD Bypass
Possible Values:
Installed
Not Installed
1. Pressing the NEXT key will display the following screen.
Configuration - Model Num Digit 28
Comparative Enthalpy
Possible Values:
Installed
Not Installed
1. Pressing the NEXT key will display the following screen.
Configuration - Model Num Digit 33
GBAS 0 - 5 VDC Module
Possible Values:
Installed
Not Installed
1. Pressing the NEXT key will display the following screen.
Configuration - Model Num Digit 33
Ventilation Override (VOM)
Possible Values:
Installed
Not Installed
1. Pressing the NEXT key will display the following screen.
Configuration - Model Num Digit 28
Ventilation Ctrl
Possible Values:
Traq™ Dampers
Standard Dampers
1. Pressing the NEXT key will display the following screen.
CONFIGURATION
INSTALLED
INSTALLED
INSTALLED
INSTALLED
TRAQ DAMPERS
65
Hide quick links:
Advertisement
Table of Contents
