Table of Contents
Advertisement
Top Panel Overview
1. DC Connector
Provides input for the DC power source via an
AC- DC adapter. Make sure that the line- power
source outlet has a protective ground contact.
2
. Charging indicator
Lights when the battery is charging.
3. External power indicator
Lights when an external DC power is input to
the analyzer via the AD- DC adapter.
4. USB interface (for PC connection)
Provides a connection between the analyzer and
a PC for data transfer of further process.
5. USB interface
Provides an connection between the analyzer
and a USB memory disk.
6. LAN Interface (For future expansion)
7. RF OUT Connector (For future expansion)
8. EXT TRIG IN/REF IN (BNC, Female)
Connects to an external TTL signal or a 10 MHz
reference signal. The TTL signal is used to
trigger the analyzer's internal sweep.
9. RF IN Connector (Type N, Female)
Accepts an external input with a frequency
ranges from 100 kHz to 3 GHz.
N9340A User's Guide
9
50 VD C M A X
33 dB m ( 2 W ) M A X
R F I N PUT 50
E x t . Po w er
C ha rgi ng
12-18 VDC
12-18 VD C
55W MAX
80 W MA X
1
3
2
N9340A Overview
8
E XT TR I G I N /
E XT R E F I N
R F OU T 50
PC
4
5
PC
7
6
1
11
Advertisement
Table of Contents
