Table of Contents
Advertisement
Marker Peak (Maximum) Left Search
:CALCulate:MARKer[1]|2|3|4|5|6:
MAXimum:LEFT
This command places the selected marker on the
next highest signal peak to the left of the current
marked peak.
Key Access
Marker Peak (Maximum) Right Search
:CALCulate:MARKer[1]|2|3|4|5|6:
MAXimum:RIGHt
This command places the selected marker on the
next highest signal peak to the right of the current
marked peak.
Key Access
Marker Mode
:CALCulate:MARKer[1]|2|3|4|5|6:MODE
POSition|DELTa|OFF
:CALCulate:MARKer[1]|2|3|4|5|6:MODE?
This command sets the Markers to the following
mode:
• Position
Selects a normal marker that can be positioned
on a trace and from which trace information will
be generated.
• Delta
Activates a pair of markers, one of which is
fixed at the current marker location. The other
marker can then be moved around on the trace.
The marker readout shows the difference
between the two markers.
N9340A User's Guide
SCPI Command Reference
[Marker] > {Peak search} > {Next Left PK}
[Marker] > {Peak search} > {Next Right PK}
6
107
Advertisement
Table of Contents
