Display Subsystem; Turn The Entire Display On/Off; Trace Y-Axis Scaling - Agilent Technologies N9340A User Manual

6 SCPI Command Reference

DISPlay Subsystem

The DISPlay subsystem controls the selection and
presentation of textual, graphical, and trace
information. Within a display, information may be
separated into individual windows.

Turn the Entire Display On/Off

:DISPlay:ENABle OFF|ON|0|1
This command turns the display on or off. Having
the display turned off may increase repetitive
measurement rate.
*RST State:

Trace Y-Axis Scaling

:DISPlay:WINDow:TRACe:Y[:SCALe]
:PDIVision 1|2|5|10
:DISPlay:WINDow:TRACe:Y[:SCALe]
:PDIVision?
This command sets the per- division display scaling
for the y- axis when y- axis units are set to
amplitude units.
*RST Value:
Range:
Key Access:
112
On
10 dB
1 dB, 2 dB, 5 dB or 10 dB
[AMPTD] > {Scale/DIV}
N9340A User's Guide