Agilent Technologies N9340A User Manual page 132

6 SCPI Command Reference
Center Frequency Step Size Automatic
[:SENSe]:FREQuency:CENTer:STEP:AUTO
OFF|ON|0|1
[:SENSe]:FREQuency:CENTer:STEP:AUTO?
This command specifies whether the step size is
set automatically based on the span.
*RST State:
Key Access:
Center Frequency Step Size
[:SENSe]:FREQuency:CENTer:STEP
[INCRement] <freq>
[:SENSe]:FREQuency:CENTer:STEP
[INCRement]?
This command specifies the center frequency step
size.
*RST Value:
Available unit:
Key Access:
Frequency Span
[:SENSe]:FREQuency:SPAN <freq>
[:SENSe]:FREQuency:SPAN?
This sets the frequency span.
Setting the span to 0 Hz puts the analyzer into
zero span.
*RST Value:
Available unit:
Key Access:
130
On
[FREQ] > {CF Step}
300 MHz
Hz, kHz, MHz, GHz
[FREQ] > {CF Step}
3.0 GHz
Hz, kHz, MHz, GHz
[SPAN] > {Span}
N9340A User's Guide