Table of Contents
Advertisement
CALCulate:MARKer Subsection
Markers All Off on All Traces
:CALCulate:MARKer:AOFF
This command turns off all markers on all the
traces.
Key Access:
Markers All On
:CALCulate:MARKer:ALL
This command turns on all the markers and places
them on six highest peaks.
*RST State:
Key Access:
Frequency Counter Marker
:CALCulate:MARKer[1]|2|3|4|5|6:FCOunt
[:STATe] OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4|5|6:FCOunt
[:STATe]?
This command turns on or off the marker
frequency counter. To query the frequency counter,
use
:CALCulate:MARKer[1]|2|3|4|5|6:FRECount
:X? If the specified marker number is not on, it
will be turned on and becomes the active marker
(normal mode). Once the marker count is on, it is
on for any active marker, not just for the one used
N9340A User's Guide
SCPI Command Reference
[Marker] > {More} > {All Off}
Off
[Marker] > {Peak search} > {Auto search}
6
105
Advertisement
Table of Contents
