Sweep - Agilent Technologies N9340A User Manual

In FFT Mode
In FFT mode, the sweep time is auto- coupled as
default. And the submenu of sweep time is invalid
in FFT mode.

Sweep

Actives the sweep mode function and accesses the
the associated softkeys to set functions that affect
the way trace sweep on the display.
Sweep
Toggles the analyzer between the continuous- sweep
mode and the single- sweep mode.
• Sweep (Single)
Puts the analyzer in a single- sweep mode. In a
single- sweep mode, pressing [BW/SWP] > {Single
Sweep} enables a sweep.
Key Access: [BW/SWP] > {Sweep}
• Sweep (Cont)
Performs one sweep following another as soon as
it is triggered. Pressing [Preset] (When Preset
Type is set to Default) or turning the power on,
sets the sweep mode to continuous sweep as
default.
Key Access: [BW/SWP] > {Sweep}
Sweep Mode
A N9340A provides two sweep modes to meet
different sweep time requirements:
• Normal
Actives the sweep mode as default.
Key Access: [BW/SWP] > {Sweep} > {Sweep Mode}
N9340A User's Guide
Key Reference 5
75