DEMOdulation Subsystem
This sub tree commands are used to control the
demodulation after the measure has been loaded
by[:SENSe]:FREQuency:SPAN:ZERO
AM Demodulation
:DEMod:AM:STATe OFF|ON|0|1
:DEMod:AM:STATe?
This command toggles AM demodulation function
between off and on.
*RST State:
Key Access:
FM Demodulation
:DEMod:FM:STATe OFF|ON|0|1
:DEMod:FM:STATe?
This command toggles FM demodulation function
between off and on.
*RST State:
Key Access:
N9340A User's Guide
SCPI Command Reference
Off
[Span] > {Demode} > {AM (On)}
Off
[Span] > {Demode} > {FM (On)}
6
111