Table of Contents
Advertisement
1
N9340A Overview
Charging a Battery
You can only charge the battery when it is in the
analyzer.
first use.
Never use a modified or damaged charger.
CAU T ION
CAU-
Internal Charging
Use your N9340A to recharge the battery while the
analyzer is operating or shut down.
1 Install the battery in the analyzer.
2 Simply attach the AC- DC adapter and switch on
external power.
3 The charging indicator lights, indicating that the
battery is charging. When the battery is fully
charged, the green charging indicator turns off.
For a fully depleted battery, the charging time is approximately
N O TE
three hours if the analyzer shut down, longer time is needed if
the analyzer is operating.
During charging and discharging, the battery will
monitor and report its voltage, current, and
temperature. If any of these monitored conditions
exceed their safety limits, the battery will
terminate any further charge or discharge until the
error condition is corrected.
14
Fully charge the battery when for the
N9340A User's Guide
Advertisement
Table of Contents
