Table of Contents
Advertisement
6
SCPI Command Reference
Marker Read Y Value
:CALCulate:MARKer[1]|2|3|4|5|6:Y?
This command reads the current Y value for the
designated marker or delta on its assigned trace.
The value is in the Y- axis units for the current
trace (which is often dBm).
*RST State:
Remarks:
110
Matches the units of the trace
on which the marker is
positioned.
This command is used to read
the results of marker functions
such as band power and noise
that are displayed in the marker
value field on the analyzer.
N9340A User's Guide
Advertisement
Table of Contents
