Table of Contents
Advertisement
6
SCPI Command Reference
in the command. A 1 is returned only if marker
count is on and the selected number is the active
marker.
Remarks:
*RST State:
Key Access:
Marker Function
:CALCulate:MARKer[1]|2|3|4|5|6:FUNCtion
FCOunt|NOISe|OFF
:CALCulate:MARKer[1]|2|3|4|5|6:FUNCtion?
This command selects the marker function for the
specified marker.
FCOunt is a frequency counter function.
NOISe is a noise measurement.
OFF turns off all functions.
Key Access
Marker Peak (Maximum) Search
:CALCulate:MARKer[1]|2|3|4|5|6:MAXimum
This command performs a peak search based on
the search mode settings.
Key Access
106
If a frequency count x value is
generated when the frequency
count state is off, then 9e15 is
return.
Off
[Marker] > {More} > {Freq Count}
[Marker] > {More (1 of 2)} > {Mode}
[Marker] > {Peak search} > {Peak}
N9340A User's Guide
Advertisement
Table of Contents
