Table of Contents
Advertisement
• Noise
Active a noise readout mode for evaluating power
density.
Noise mode is properly only on noise peaks and not supported
N O TE
under Marker Delta condition.
Key Access: [MARKER] > {More (1 of 2)} > {Mode}
Marker Trace
Activates a marker on the trace if there are no
markers turned on. If a marker is currently active,
press Marker Trace until 1, 2, 3, or 4 is underlined.
The active marker will be moved to the selected
trace.
Selecting
automatically selected trace. The selection order is
to look for the lowest numbered trace in the
following order of trace modes:
Clear write
Min hold
If there is no trace in any of these modes, it
selects trace 1 as default.
Key Access: [MARKER] > {Marker Trace}
All Off
Turns off all of the markers, including markers
used for signal track and demodulation. Marker
annotation is also removed.
Key Access: [MARKER] > {All Off}
N9340A User's Guide
Auto
will move the marker to the
Max hold
View
Key Reference
5
85
Advertisement
Table of Contents
