Preparation For Use; Setting Up Your N9340A; Testing Key Stroke And Screen Pixel - Agilent Technologies N9340A User Manual

2 Getting Started

Preparation for Use

Use [SYS] hardkey to check or set the system
settings of your analyzer.

Setting up your N9340A

1 Press [SYS] > {Setting} > {General} to set time and
power saving mode:
•
•
2 Press [SYS] > {Setting} > {Language} to select a
language displayed on screen.
3 A N9340A allows you to manually adjust the
display brightness and contrast.
•
•
4 Press [SYS] > {More(2 of 3)} > {Key Beep} to toggle
the buzzer beep function between on and off.

Testing key stroke and screen pixel

1 Press [SYS] > {More (2 of 3)} > {Diagnostics} > {Front
Panel} to test all the front panel keys except the
[PRESET] hardkey and power switch.
2 Press [SYS] > {More (2 of 3)} > {Diagnostics} > {Black
Pixel} or {White Pixel} to check the LCD pixel.
24
Press {Time/Date} to set the time and date for
your analyzer.
Press {Power Manager} to select a power saving
mode from the follow three modes: turning off
backlight, turning off screen display, and
turning off both backlight and screen display.
Press [SYS] > {Brightness} and then rotate the
knob to adjust display brightness.
Press [SYS] > {Contrast} and then rotate the
knob to adjust display contrast.
N9340A User's Guide