Full Start Options; Setup For Internal Calibrator Use (Full Start) - Teledyne 3060E Instruction Manual

Operations Operations
Operations Operations Operations

Full Start Options

Setup for Internal Calibrator Use (Full Start)

VALVES: OFF
CAREFULLY FILL THE CALIBRATOR
W ITH A HALF CC OF CALIBRATION
ELECTROLYTE
--- PRESS ACK W HEN READY ---
1 2
VALVES: OFF
DO YOU W ANT TO CONNECT THE
OPTIONAL SPAN GAS TANK
AT THIS TIM E?
YES
1 2
VALVES: OFF
CONNECT A SAM PLE GAS
TO THE SAM PLE PORT
--- PRESS ACK W HEN READY ---
1 2
VALVES: PURGE-TO-SPAN
PURGE IN PROGRESS
TIM E REM AINING 00 : 01 : 00
PLEASE W AIT . . .
SKIP
1 2
ACK ESC
3 4 5
NO ESC
3 4 5
ACK ESC
3 4 5
3 4 5
Teledyne Electronic Technologies
Analytical Instruments
Ultra Ultra T T T T T race Oxyg Ultra race Oxyg race Oxyg
Ultra Ultra race Oxygen Anal race Oxyg
6. If you request the internal calibra-
tor, you are directed to fill the
calibrator with electrolyte. After
the process is completed, press
to continue or
ACK
the previous screen.
7. After pressing
ACK
next screen gives the option of
connecting the span gas tank.
Press for internal calibrator
NO
only.
8. After pressing in step 7, the
NO
system directs you to connect the
sample gas tank to the appropri-
ate inlet. After the process is
completed, press
ACK
sures that the sample gas is
connected to the sample inlet of
the analyzer
9. After pressing
ACK
system performs a sample line
purge, then automatically contin-
ues on to step 10.
en Anal en Anal yz yzer er er er er yz yz
en Anal en Analyz
to return to
ESC
in step 6, the
. This en-
in step 8, the
4-13