Zero Calibration - Teledyne 3060E Instruction Manual

Operations Operations
Operations Operations Operations
VALVES: CALIBRATOR SPAN T=25C
OXYGEN= 5.0 PPM O2
FLOW = 150.0 CC/M IN
SETTLING DELAY = 899 SECS
W AIT FOR O2 SETTLING
OR ANY KEY TO ABORT
1 2
VALVES: ANALYZE
FLOW = 150.0 CC/M IN
5.00
AUTORANGE: 10 PPM
CAL STDBY
1 2

Zero Calibration

VALVES: ANALYZE
FLOW = 150.0 CC/M IN
5.00
AUTORANGE: 10 PPM
CAL STDBY
1 2
VALVES: ANALYZE
SELECT CALIBRATION FUNCTION
SHOW ZERO
1 2
VALVES: ANALYZE
CHOOSE M ANUAL OR AUTO SETTLING
AUTO M AN
1 2
14. If you have chosen Auto settling, the
3 4 5
•
•
C=9:59 T=25C
PPM 02
SETUP RANGE ALRM R
3 4 5
1. After completing span calibration, select
C=9:59 T=25C
PPM 02
SETUP RANGE ALRM R
3 4 5
2. When you press
SPAN ANALY
3 4 5
3. The display will ask you to select
ESC
3 4 5
Teledyne Electronic Technologies
Analytical Instruments
Ultra Ultra Ultra T T T T T race Oxyg race Oxyg race Oxyg
Ultra Ultra race Oxygen Anal race Oxyg
screen will display the present oxygen
concentration, the flow rate, and the
time left in seconds until the calibrator is
checked for settling.
If you press any key to abort out of
Auto settling, you will automatically
return to the Analyze mode main menu.
If you wait until the reading is stable,
the calibrator will turn on, and after
calibration is complete, the calibrator
will automatically shut off. Then the
system will automatically return to the
Analyze mode main menu.
while in the Analyze mode to select
CAL
the Calibration mode.
, the screen dis-
MAN
plays the Calibration mode menu. Press
to begin Zero Calibration.
ZERO
between manual or automatic calibrator
settling. If you press
MAN
step 5.
en Anal en Anal yz yzer er er er er yz yz
en Anal en Analyz
, continue to
4-33