Gas Connections; Table 3-8: Commands Via Rs-232 Input; Table 3-9: Required Rs-232 Options - Teledyne 4060 Series Instruction, Operating And Maintenance Manual

Series 4060

Table 3-8: Commands via RS-232 Input

Command
AS<enter>
AL<enter>
RL<enter>
RM<enter>
RH<enter>
RA<enter>
Implementation: The RS-232 protocol allows some flexibility in its
implementation. Table 3-9 lists certain RS-232 values that are required
by the Model 4060 implementation.

Table 3-9: Required RS-232 Options

Parameter
Stop Bits
Message Interval

3.3.3 Gas Connections

The analyzer gas connection diagram identifies the various gas
connection points as to function and location. Figure 3-1 shows the gas
connection points for instruments fitted with the optional autocal
module.
Teledyne Analytical Instruments
Description
Immediately starts an autospan.
Immediately revert to Analyze (CH4 Mode)
Change to Manual Range LOW
Change to Manual Range MEDIUM
Change to Manual Range HIGH
Change to Manual Range AUTO
Setting
Baud 2400
Byte 8 bits
Parity none
1
Sent at the end of each cycle.
Installation
37