Copying Pattern Button - JUKI AMS-210EN/IP-420 Instruction Manual

2-19. Copying pattern button

The sewing data of the pattern button No. which has already been registered can be copied to the pat-
tern button No. which is not registered. Overwriting copy of the pattern button is prohibited. When you
desire to overwrite, perform it after deleting the pattern button once.
/ Refer to "@-2-17. Performing pattern button No. selection"
A
4 Determine the change of item data.
For example, input X scale rate. Press
the item data input screen. Input the value you desire with the
K
ten keys or + or – key K . When ENTER button
pressed, the data is determined.
L
5 Close the pattern button data change screen.
M
When the change is over, press CLOSE button
pattern button data change screen is closed and the screen
returns to the data input screen.
* It can be performed to change the other item data by the same
operation.
1 Display the data input screen.
Only in case of the data input screen (blue) at the time of pat-
tern button selection, it is possible to copy. In case of the sew-
ing screen (green), press READY switch
data input screen (blue).
2 Call the pattern copy screen.
When PATTERN BUTTON COPY button
the pattern button copy (copy source selection) screen is dis-
played.
– 62 –
B to display
p.59.
to display the
A is pressed,
L is
M . The