How To Use The Operation Panel; Basic Operation Of The Operation Panel (Ip-420); Confi Guration Of Ip-420 - JUKI APW-895N/IP-420 Basic Operation Manual

II. HOW TO USE THE OPERATION PANEL

1. BASIC OPERATION OF THE OPERATION PANEL (IP-420)

(1) Confi guration of IP-420
[ Front ]
❶
❷ ❸
Symbol
TOUCH PANEL, LCD display section
❶
READY key
❷
INFORMATION key
❸
COMMUNICATION key
❹
MODE CHANGEOVER key
❺
Contrast control
❻
Brightness control
❼
CompactFlash (TM) eject button
❽
CompactFlash (TM) slot
❾
Cover detection switch
❿
Connector for external switch
⓫
Connector for control-box connection
⓬
1. Lightly press the target key on the touch panel with a fi ngertip to operate the IP-420. If you
operate with any means other than your fi ngertip, the IP-420 can malfunction or the glass
surface of the touch panel can be scratched or break.
2. When READY key is pressed fi rst after turning ON the power, origin retrieval of the clamp
foot is performed. At this time, the clamp foot moves. So, be careful.
❹ ❺
Name
❻
❼
❽
❾
❿
⓫
⓬
Description
Change-over of the data input screen and the sewing screen is
performed.
Change-over of the data input screen and the information screen is
performed.
Change-over of the data input screen and the communication
screen is performed.
Change-over of the data input screen and the mode change-over
screen which performs various details setting.
− 9 −
[ Right side ]