Oven Control Knobs - Thermador PD36 Care And Use Manual

Section FIVE: USING THE COOKTOP
the Secondary Oven
SECONDARY OVEN (Only on PD48)
This feature maintains the warm environment needed for keeping
cooked foods hot.
To Set the Secondary E_ectric Oven for warming
1. To preheat the oven turn the selector switch to warm about
10 minutes before use. Do not turn on the Oven Control Knob.
.
.
Place the hot food in small oven. Close door.The ideal
temperature for keeping the food warm will be maintained until
the Selector Switch is turned off.
Do not open the oven door unnecessarily. Opening the door
will reduce the temperature of the oven.
to Warm
OVEN CONTROL KNOBS
Food Safety Concern
Food Poisoning Possible
Do not use the Warming Mode for cooking food. The warming oven
mode is not hot enough to cook foods at safe temperatures.
the
y Oven to Proof
SECONDARY OVEN (Only on PD48)
The proof feature maintains the warm, non-drafty environment needed
for proofing yeast leavened products.
To Set the Secondary E_ectric Oven for Proofing
1. Place dough in dish in the small oven. Close the door.
.
Select PROOF using Selector Switch. Do not turn on Oven
Control Knob.
A The ideal temperature for proofing will be maintained until
the Selector Switch is turned off.
A The oven ON light and the oven interior lights turn on.
A The HEATING light will not turn on in the proofing mode.
3. Set a minute timer for the minimum proof time.
A Do not open the oven door unnecessarily. Opening the
door will lower the temperature of the air in the oven and
lengthen the proofing time.
OVEN CONTROL KNOBS
_FF
I_.Cj
Proofing time may be decreased
when using the large oven at the
same time you are proofing. Check
bread product early to avoid over-
proofing. If you are using the
large oven for extended periods
of time we recommend, for
optimum results, that you
complete the proofing before using
the large oven.
29