Thermador PD36 Care And Use Manual page 22

Section Four: USING THE COOKTOP
D of the Grill
CAUTION'.
. Use extreme care when p_acing the grill
components into the gdH compartment.
Avoid contacting the ceramic igniter wMch
could break preventing operation of the
griH.
. The grill must be assembled as shown. The
drip tray heat shields must be in place, and
the burner must be properly positioned
relative to the gas supply, mncorrect
assembly of the grill may result in unsafe
or hazardous conditions during operation.
. The grill radiant must be in p_ace for proper
operation of the gdH.
. Do not _eave the grill unattended while in
use,
. Do not use charcoal briquettes or coals of
any kind.
Follow the steps below to disassemble the
components in the grim box.
A. Remove the grill grate, stainless steel radiant and
burner from the grill box.
B. Remove the heat deflector from the slots on the
front panel of the grill box,
C. Remove the rectangular drip pan inside the grill
box as shown below.
Re=assembly
A. Replace the drip pan and heat deflector.
B. Insert the end of the burner into the slots at the
back of the grim box. Insert the tab on front of the
burner into slot in the heat deflector.
C.
D.
The stainless steel radiant lies on two (2) studs
on each end of the grill can.
Place the grim grate, with raised food contain-
ment rail oriented towards the gdll box rear.
Drip Pan
Exploded Views and Side View of Gdii
\
\
Gritl Box
Deflector /
/
/
/
/
/
/
i
/
/
i
Burner placement in slots in back of grill
20